Fuel pre-filter installation

R51 specific technical questions & information

Moderator: Forum Administrator

Fuel pre-filter installation

Postby misterpatty » Wed Jan 16, 2019 11:05 am

Hi all.

I’m fitting a Direction Plus pre-filter which is going well so far but the instructions are quite poorly written and don’t give much detail on what exactly to do and where things are located.
Does anyone know A: where the steel fuel line from the tank is so I can connect the inlet hose of the pre-filter to it, and
B: which connection on the factory filter is the inlet to connect to the outlet of the pre-filter.

Thanks in advance guys
2012 R51 ST manual. ARB deluxe bar, SS bash plates, spotties & light bar, an EGR that no longer runs (shhh), Rhino roof bars, Kings awning, and not much else yet
misterpatty
 
Posts: 3
Joined: Wed Jan 09, 2019 10:48 pm
Location - Town or City: Rockhampton
Location - State: Queensland
Location - Country: Australia

Re: Fuel pre-filter installation

Postby toymaz » Sun Jan 20, 2019 10:37 pm

Hi
The inlet to the filter is closest to firewall.
I cut the hose and used brass joiners,
Mine might be different filter, but same process.

Cheers
2012 white St Auto, Safari Snorkel, 2"lift,. ARB bullbar ,egr block, 3"exhaust, provent 200,
User avatar
toymaz
 
Posts: 92
Joined: Sun Jan 27, 2013 6:35 pm


Return to R51 Pathfinder (2005 to 2013)

Who is online

Users browsing this forum: No registered users and 1 guest

cron