Limp mode when Pathy get on temperature

R51 specific technical questions & information

Moderator: Forum Administrator

Limp mode when Pathy get on temperature

Postby Redfoxza » Sun Mar 18, 2018 8:50 pm

Hi There

My pathy goes into limp mode when it gets on running temperature. :?
Does anyone had this problem.
ECU reads a 212 error (Injector Circuit Malfunction Cylinder 12) but what does
this mean and where do I start looking for it. :idea:

Cheers 8)

OK I got it diagnose with a proper machine and the code is P1212.
Where do I start.
Redfoxza
 
Posts: 8
Joined: Tue Dec 19, 2017 12:52 pm
Location - Town or City: Bunbury
Location - State: WA
Location - Country: Australia

Re: Limp mode when Pathy get on temperature

Postby Redfoxza » Tue May 15, 2018 12:43 pm

OK Nissan diagnosed it for me as the ABS unit and a very expensive repair -$7800
It was a $154 worth spending.
Redfoxza
 
Posts: 8
Joined: Tue Dec 19, 2017 12:52 pm
Location - Town or City: Bunbury
Location - State: WA
Location - Country: Australia

Re: Limp mode when Pathy get on temperature

Postby Bruce » Wed May 16, 2018 1:34 pm

wow. I had a quote some time back at the local Nissan dealer for an ABS controller replacement at around $3500 fitted. i ended up buying a used one from Niss4x4 for $500.
2008 2.5TD ST-L, OME lift, Nissan bullbar, custom steel sliders, SCA winch, Tradesman roofrack BFG KO 265/70R17, DigOptions S160 Android head unit, GME TX3220 UHF.
Bruce
 
Posts: 100
Joined: Mon May 25, 2009 11:41 am
Location: Canberra


Return to R51 Pathfinder (2005 to 2013)

Who is online

Users browsing this forum: Bing [Bot] and 5 guests